/ Woven Wire Mesh Security Partition
China Woven Wire Mesh Security Partition Manufacturer, Supplier, Exporter, Buyer

Woven Wire Mesh Security Partition (Ningbo Brynick Enterprises Limited,China)
Woven Wire Mesh Security Partition

Specifications:
1) 10 gauge steel wire woven into 1-1/2" diamond mesh, securely attached to framing
2) Vertical frame: 1-1/4 x 5/8" cold rolled 'C' steel channels with 1/4" bolt holes
3) Horizontal frame: 1 x 1/2" cold rolled steel channels
4) All joints are mortised and tenoned
5) Center reinforcing bar: two cold rolled steel channels 1 x 3/8" riveted through wire mesh at 3'6" from floor, additional bar required for 12' high partition
6) Top capping bar: 1-1/2 x 1" cold rolled steel channel, with 1/4" bolts 30" O.C.
7) Corner posts: 1-1/2 x 1-1/4" steel angles with 1/4" bolt holes
8) Floor sockets: cast aluminum
9) Door frame: 1-1/4 x 1/2" cold rolled steel channel 10) Sliding doors have two four-wheel roller bearing truck/hangers enclosed in a galvanized steel box track and one steel channel bottom guide 1
1) Hinge doors have 1-1/2 pairs of butt hinges bolted to door and transom frame 1
2) Locking clasps arranged for padlocking or cylinder mortise lock outside with recessed knob inside available 1
3) All partitions have 3" sweep space and include hardware and accessories for proper installation, specify partition to wall connection hardware separately 1
4) Surface finish: one shop coat gray powder coated
Google




China Woven Wire Mesh Security Partition Manufacturer, Supplier, Exporter, Buyer
Copyright © 2007 Padlock-Manufacturer.com